01.12.2014, 12:40
01.12.2014, 17:13
07.12.2014, 15:22
07.12.2014, 23:36
Hey. This firmware must be installed via Flash Tool application.Сообщение от clarkkpothanks for the reply. But i dnt knw how install it. I tried it via recovery option but it doesnt wan to intall.
Could tell me how to install it. THank you once more
Here's a brief instruction (it's not that brief afterwards lol). All the links down below
1. First of all you have to install the drivers. Download the archive called MT6589+drivers.zip and extract it, then install the driver.
2. After you did this, turn off your phone, take out the battery then put it in again, but do not turn on the phone, leave it turned off. While turned off open the Device Manager on your PC (just right click PC -> properties -> device manager) and after this connect your phone to the PC (it must be turned off). Look at the device manager and find a new device it must be called MT6589 Preloader or something like that (it should be in "Other Devices" or in "Ports"). Should look something like this
3. After you found the Preloader in the device manager, right click it and choose the driver update, then choose to search the drivers on this PC and then click browse button and navigate to the folder where you extracted the MT6589+drivers.zip and install the drivers.
Note that if you have Windows 8, you'll need to disable verification of digital signature of the driver, just google it and you'll find the tutorial
4. That should to the trick with drivers. After you install them, disconnect the phone and reboot the PC. Leave the phone disconnected from the PC.
5. Now download the firmware in the link provided above and extract it. You will get the folder where all the files needed for flashing the phone are located
6. Next download the SPFlashToolv3.zip (look for the link below) and extract it as well. After you extracted this archive, navigate to the folder and run Flash_tool.exe as administrator (right click -> run as administrator)
7. You will see a window of a Flash Tool application. Click the Scatter-loading button in the right part of the window and then navigate to the folder where you extracted the firmware. Choose the file MT6589_Android_scatter_emmc.txt that is located in the firmware folder we extracted previously
8. After you choose the scatter-file, everything should look like at the screeshot below
9. Make sure checkboxes are the same as shown above. If you have some checkboxes unchecked (except CACHE and USRDATA) click on it's name and navigate to the folder with the firmware, after that just choose the file coresponding with the name of the chekcbox name. For example if you don't have a chackbox next to RECOVERY, you click the checkbox next to it in the Flash Tool, then you click the name RECOVERY itself, and then you choose the recovery.img file in the firmware folder
10. Now all the files are seted up for a flashing. Take you phone, and unplug it from the PC (if it was pluged in). Take the battery out and put it back again, but do not turn on you phone. Afther you did this click the Download button in the Flash Tool window (the warning will pop up, agree with it to continue) and afterwards connect your turned off phone to the PC.
11. You should see the flashing proccess running in the Flash Tool window. If it didn't start, try to recconect your phone to PC (unplug ang plug it back). If it doesn't start again, than, most likely, we have the issue with the drivers.
12. Wait till the flashing is finished, you will see a little window poping up with a green circle, which means flashing was successful. After that you can disconnect your phone, and close the Flash Tool. Take the battery out one more time, put it back in, and turn on the phone as usual. The first start after flashing a rom can take more time then usual.Cкачать:
MT6589+drivers.zip402.8 КбSPFlashToolv3.zip6.93 Мб
08.12.2014, 11:01
08.12.2014, 12:18
08.12.2014, 19:30
I think this is because this firmware that you flashed is pre-rootedСообщение от clarkkpoHey i think i have found some kind of bug (but not sure). i have received update through ota, it does download, but does nt install.
I m trying to show you the bug ( i am not a pro) ,but here-
assert failed:apply_patc_check( system/framework/corex.oedx"fdc37.............,37b69..........
(those dots means some digits and letters)
any idea?you might not be able to update via OTA after you flashed pre-rooted firmware. But I'm not completely sure about this. Unfortunately, I haven't found a completely stock firmware for 7600 DUO, but if you find, now you know how to flash it via Flash Tool.
09.12.2014, 11:12
I think so. But anyway if you come across with unrooted version please upload it. I will be keep trying.thank you anyway.
18.09.2015, 11:41
